Configurator Nozzles

HomeBack to Start
DE | EN
Select: Latching
1
Group: ZVG 2 / GasGuard
Product NameZVG 2 / GasGuard
Short DescriptionLiquefied Petroleum Gas (LPG) nozzles
DescriptionZVG 2 ACME/DISH/EURO
max. 50 l/min.
GasGuard ACME/BAYO
max. 63 l/min.
Suitable for vehicle and tank refuelling with liquefied petroleum gas.
Product Sheet
ZVG 2 ACME/DISH/EURO, Page 561-564
GasGuard ACME/BAYO, Page 567-574
2
Nozzle Type: GasGuard Standard Nozzles
Product NameGasGuard Standard Nozzles
Part NumberGG
Short DescriptionWith ACME or BAYO (bayonet) coupling
DescriptionMax. flowrate 63 l/min.
Suitable for LPG (autogas) vehicle refuelling as well as mobile and small stationary storage tanks with propane, butane and mixtures.
PressureWorking pressure max. 25 bar.
Burst pressure >100 bar.
Temperature-40 C to +110 C
Product Sheet
Page 567-574
3
Body: Standard
Product NameGasGuard standard nozzles
Short DescriptionStandard
4
Coupling Type: For Bayonet filler necks to EN 12806
Product NameGG30
Part Number30
Short DescriptionFor Bayonet filler necks to EN 12806
DescriptionMax. flowrate 60 l/min.
Suitable for vehicle refueling with LPGas.
4-slot design to make connection of the nozzle to the vehicle fill point easier.
Gas release volume on valve closure: 2,2 cm.
CommentNew:
4-slot design to facilitate connection of the nozzle to the vehicle fill point.
New nose piece design to reduce the released gas upon valve closure, incorporating improved gas release method to minimise the risk of splash back.
Stickers are applied to assist users in operating the nozzle.

Safety:
Cannot discharge LPGas to the atmosphere when not coupled and lever is actuated.
Dual sealing system to reduce the chance of leakage if bayonet fill point is badly damaged or worn.

Standard-Specification:
Nozzle body aluminium, comfigrip PVC, swivel stainless steel, coupling nut aluminium/stainless steel with ratchet safety system. Valve body zinc chromated steel. Inner parts stainless steel, acetyl resin and PA, lever PA. Optional hold-open latch red anodized aluminium. Seals LT-NBR, LT-Viton®, PU. 300 m/50 mesh strainer of POM fitted as standard.
PressureWorking pressure max. 25 bar.
Burst pressure >100 bar.
Temperature-40 C to +110 C
Weight~ 1,9 kg
Product Sheet
Information 3.15
Page 567-574
5
Latching
Without hold-open latch
Additional Info

Without hold-open latch

Deadman function

No hold-open function.

With hold-open latch
Additional Info

With hold-open latch

Standard

To assist the customer in holding the lever during the refuelling process.

6Magnet
7Splashguard
8Swivel
9Order No.

Part Number

GG30...

Nozzle TypeGasGuard Standard Nozzles
Product NameGasGuard Standard Nozzles
Part NumberGG
Short DescriptionWith ACME or BAYO (bayonet) coupling
DescriptionMax. flowrate 63 l/min.
Suitable for LPG (autogas) vehicle refuelling as well as mobile and small stationary storage tanks with propane, butane and mixtures.
PressureWorking pressure max. 25 bar.
Burst pressure >100 bar.
Temperature-40 C to +110 C
Product Sheet
Page 567-574
BodyStandard
Product NameGasGuard standard nozzles
Short DescriptionStandard
Coupling TypeFor Bayonet filler necks to EN 12806
Product NameGG30
Part Number30
Short DescriptionFor Bayonet filler necks to EN 12806
DescriptionMax. flowrate 60 l/min.
Suitable for vehicle refueling with LPGas.
4-slot design to make connection of the nozzle to the vehicle fill point easier.
Gas release volume on valve closure: 2,2 cm.
CommentNew:
4-slot design to facilitate connection of the nozzle to the vehicle fill point.
New nose piece design to reduce the released gas upon valve closure, incorporating improved gas release method to minimise the risk of splash back.
Stickers are applied to assist users in operating the nozzle.

Safety:
Cannot discharge LPGas to the atmosphere when not coupled and lever is actuated.
Dual sealing system to reduce the chance of leakage if bayonet fill point is badly damaged or worn.

Standard-Specification:
Nozzle body aluminium, comfigrip PVC, swivel stainless steel, coupling nut aluminium/stainless steel with ratchet safety system. Valve body zinc chromated steel. Inner parts stainless steel, acetyl resin and PA, lever PA. Optional hold-open latch red anodized aluminium. Seals LT-NBR, LT-Viton®, PU. 300 m/50 mesh strainer of POM fitted as standard.
PressureWorking pressure max. 25 bar.
Burst pressure >100 bar.
Temperature-40 C to +110 C
Weight~ 1,9 kg
Product Sheet
Information 3.15
Page 567-574
Choose additional options
or click here to go on.
Choose additional options
or click here to go on.
Last Update: 10.06.2020
Your selection: